Location 31 Is Where Restaurant Chains Start to Feel Like Chains

November 18, 2026
Walk me through it
Chain café locations side by side, illustrating restaurant brand standards across a rollout

The design director walks location 31 a week before opening. Nothing is wrong. The counter is the right walnut. The pendants hang at the right height. The stools are from the approved list, and the espresso machine is the one the coffee team spent a year testing.

Then she notices the wall behind the pickup shelf. It's the same tile as store 30, which used it because the specified tile was back-ordered that month. Store 30's regional PM had copied it from store 27. Location 31 copied store 30. Nobody chose that tile for this room. It just kept coming.

She stands there and realizes the store isn't wrong. It's nobody's. Every decision in it was made somewhere else, for some other reason, and carried forward in a spreadsheet.

That's the moment a restaurant brand starts to feel like a chain. It rarely happens at location 3 or location 300. It happens somewhere around 30, when a brand is opening fast enough that the people who designed the first stores can't touch every new one, and the copy of the last store becomes the standard by default.

The fix isn't fewer restaurant brand standards. It's better ones. Standardize the process, not the spaces.

Why do restaurant brands start to feel generic around 30 locations?

Because that's roughly where the spreadsheet stops working and the brand doesn't notice.

In our conversations with growing restaurant brands, the turning point comes up again and again: more than about 30 locations in the pipeline, or a plan to grow two to three times. Below that, a well-kept spreadsheet and a design team that knows every store can hold a brand together. Above it, the same team is specifying stores it will never visit.

The growth usually arrives all at once. A brand takes new investment, announces a rollout, and the pipeline jumps. One quick-service brand we spoke with runs about 50 U.S. locations and plans roughly 200 in the next few years. A juice-bar concept opening more than 30 stores a year works in footprints around 1,000 square feet, where every inch of counter and every piece of equipment is load-bearing.

Growth at that pace is the exception. Across the Top 500 chains, unit counts grew by "a meager 1.4%," according to Technomic data cited by Nation's Restaurant News, which ranks the emerging brands adding units fastest on a list of their own. Those brands are also being watched closely: Bank of America's 2026 State of the Restaurant Industry report notes that investors are putting more weight on return on investment and unit-level economics. Every mistake copied into a new store lands in those unit economics.

At that pace, the design team stops designing stores and starts approving them. Regional PMs need a starting point, so they grab the most recent project. Each copy carries the last store's substitutions, workarounds and mistakes forward. The master spec drifts away from what's actually being built, and nobody can say which version is the real one.

The result is the sameness people complain about in chain restaurants. One urbanist writer, quoted in The Daily Meal, put it bluntly about fast-food interiors: "I don't know if you'd be able to identify what they were if they had a different name on the front." That isn't what a design-led brand set out to build. It's what a copy of a copy looks like.

What should restaurant brand standards actually control?

Less than most brands think, and more precisely. The brands that scale without going flat sort every item into three tiers instead of two.

Tier What goes in it Examples Who can change it
Lock Anything that drives throughput, food safety, maintenance or the product itself Espresso and juice machines, hoods, walk-ins, the line layout, the pickup flow Director of design, through the R&D gate
Range Things the guest sees, chosen from approved options Seating, pendants, counter fronts, tile and finish families, with regional equivalents Regional PM or local designer, from the approved list
Local Things the guest remembers about this store Art, a feature wall, a reclaimed material, a local maker's piece The project team, within a budget line

The lock tier is mostly back of house, and that's where the money is. At most quick-service brands, the bulk of spend goes to equipment, not furniture: coffee and juice machines, often custom, refrigeration and cooking lines. Those are the items where a substitution changes how fast the crew can work, and where a technical supplier relationship matters more than a price.

The range tier is where brands usually go wrong in one of two directions. Too tight, and every store gets the same stool in the same color. Too loose, and a regional team picks something that can't survive a Saturday rush. A short list of approved options per category, with an approved regional equivalent where the global pick isn't available, keeps the room recognizable without making it a photocopy.

The local tier is the one most standards documents leave out entirely, which is exactly why stores start to feel generic. If nobody is told they're allowed to choose something, nobody chooses anything. Give it a budget line and a name on the spec, and it stops getting value-engineered away.

Where do restaurant standards break during a rollout?

In three places, and none of them is the design.

The standard is a copy of the last store. Many growing brands keep equipment, lighting, finishes, tags and pricing in spreadsheets and shared folders, duplicated per cafe concept. Change a product in one copy and the others never hear about it. Outdated data carries from project to project, and post-opening lessons have to be typed back into the master spec by hand, which means they mostly aren't. Store 31 inherits store 30's back-order workaround as if it were a decision.

The design team becomes the middleman. When the standard lives in one team's files, that team approves, rejects, updates and sends every change. Regional PMs, outside consultants and GCs wait in line. Under pressure to open, they stop waiting and pick something close enough. The gatekeeper meant to protect the brand ends up being the reason it drifts.

Trial products never graduate. A new grinder or a better stool gets tested in a few live restaurants. It works, or it doesn't, and the result lives in an email thread. Six months later another region tests the same product, or the winning one never makes it into the master spec. Meanwhile, when a supplier discontinues something, the swap gets relayed by hand through drawings and schedules, store by store.

The common thread: the brand has standards, but no route for a change to travel. The standard is a document. It needs to be a process.

Who owns the standard, from first test to the next store?

In restaurant brands, design almost always owns it, and usually reaches for help before anyone else does. Purchasing approves the POs and manages the technical supplier relationships, but the master spec starts and ends with the design team. (When purchasing is still emailing the same spec to ten suppliers one at a time, that's a separate cost: the rollout tax nobody put in the budget.) The job is to give the design team a route instead of a queue.

  1. R&D tests the candidate. A new concept, a refresh or a discontinued item starts a test. Design and the kitchen and bar lead try it in a controlled set of locations, and the item is labeled a candidate, not a standard.
  2. The director of design approves it into the master spec. One person, one gate, one date. The item gets its tier (lock, range or local), its approved alternates and any regional equivalents.
  3. Design packages it by restaurant typology. Drive-thru, inline, kiosk, flagship: each gets its own equipment package and front-of-house kit, built from the master spec rather than from the last project.
  4. The regional PM starts the project from the package. Lock items arrive as they are. Range items come with their approved options. Local items arrive as a budget line with the project team's name on it.
  5. The spec book is reissued at each milestone (design development, permit, tender, construction) under revision control, so the GC and suppliers price the current version.
  6. After opening, the lessons go back to the master. A pendant that glared over the pickup shelf, a stool the crew had to repair twice. The standardization manager decides what changes, and the next package carries it.

Step six is the one most brands skip, and it's the step that keeps store 50 better than store 30 instead of a faded copy of it. For what happens when a standard changes mid-rollout, see our piece on hotel brand standards compliance, where the same problem shows up at a larger scale.

How do you decide what to lock and what to leave local?

Ask three questions about any item, in order, and stop at the first yes.

Does the crew touch it every shift? Equipment, the line, the pickup shelf, anything that affects how fast an order leaves the counter or how safely food is held. Lock it. A barista who moves between stores should never have to relearn the machine.

Would a substitution show up in a photo of the brand? The counter, the signature pendant, the color of the stool, the finish family. Range it: a short approved list, with regional equivalents where the global pick isn't sold or ships in too many weeks.

Would a guest remember it about this store specifically? The mural, the reclaimed beam, the table from a local woodworker. Leave it local, give it a budget line, and name who chooses it.

If an item gets no yes at all, it probably doesn't belong in the standard. That's the part brands resist. A thinner standard feels riskier. In practice, a 40-page standard that tries to control everything gets copied wholesale or ignored, and a short one with a clear lock list gets followed.

There's a candid version of this rule, too: lock what the guest tastes, range what the guest sees, and leave local what the guest remembers.

What does a standard that travels look like?

It looks less like a PDF and more like a set of packages a regional PM can start from, with the tiers built in.

That's how SpeCurate structures restaurant brand standards. A standardization team builds Collections per brand, region, tier or space, so the drive-thru equipment package, the inline front-of-house kit and the flagship bar each live as their own Collection. Every item carries its approved suppliers, a mandatory or design-review flag, and its instructions and requirements, with reference alternatives sitting underneath. A new Collection stays in Draft until someone marks it Ready to use, so nothing half-finished reaches a project.

When a regional PM starts store 31, they pick the Collection and add all of it or just the parts that fit the site. Regions attach to Collections, so a project in a given region sees the suppliers that actually serve it. Project prototypes let a new store start from the current typology in one step, instead of from whatever store 30 happened to become. See how brand standards teams use SpeCurate by Fohlio.

Before location 31, check these

If you answered no to the last two, your brand is already copying itself. That's fixable before the next opening, not after. Book a SpeCurate by Fohlio demo and bring the spec sheet your newest store was copied from.

Weighing how much of that spec work your design partners now hand to AI? Join our free 30-minute webinar on December 8, The AI Handoff: What Owners Should Expect From Their Design Partners.

Restaurant brand standards: common questions

What are restaurant brand standards? They're the rules a multi-unit restaurant brand uses to build every location: the equipment, layouts, finishes, furniture and suppliers each store must or may use. Good standards control what affects the product, the crew and the brand's recognizability, and leave room for each location's own character.

How do you keep restaurant locations consistent without making them feel the same? Sort every item into three tiers. Lock what drives throughput and food quality, such as equipment and the line. Offer approved options for what guests see, like seating and lighting. Leave a budgeted, named choice for local pieces such as art or a feature wall.

When does a restaurant brand need formal design standards? Often around 30 locations in the pipeline, or when a brand plans to grow two to three times. Below that, a small design team can oversee every store. Above it, regional teams start copying the most recent project, and the standard drifts.

What is a restaurant equipment package? A predefined set of back-of-house equipment for one restaurant type, such as drive-thru, inline or kiosk, with approved models, suppliers and requirements. Regional teams start each new project from the package instead of rebuilding the equipment list.

Who owns restaurant brand standards? Usually the design team, led by a director of design or a standardization manager who approves items into the master spec. Purchasing manages supplier relationships and POs, and regional PMs apply the standard to each site.

How should a restaurant brand handle trial products? Test them in a controlled set of locations as candidates, record the results in one place, and have one person approve them into the master spec. Until approved, a trial product shouldn't be copied into other projects.